Latest windows update error CoreTemp 1.11 processor notfound

[tamalero]

Hello!

The latest windows update just installed a few hours ago and I got the nasty surprise to find that CoreTemp is now throwing the "ERROR, CoreTemp did not find any supported processors. This program will not continue".

This was working fine for the past 6 months.

System:

Threadripper 1950X
ASUS X399 Prime
32GB DDR4 Ram (Hynix 3000CL15) Corsair Domminator Platinum
Nvidia 1070GTX Gigabyte G1 Gaming
1x VNME 256Gb (boot drive) 1x SSD (gaming drive) 1x4tb HDD (data file)
Asus XONAR DX

Weirdly. the core temp comes out empty??

*edit*
The only change was moving from BIOS 503 to BIOS 601 (AGESA change from TR1.0.0.4 to AGESA TR1.0.0.5)

[The Coolest]

Could you please post TXT output from CPU-z?

[tamalero]

Full error:

"Core temp did not find any supported processors. This program will not continue"
"If you are certain that your cpu is in the list of the supported processors, would like to create a register dump file to help the developers fix the issue?"

When clicking to generate the dump file, it creates an EMPTY FILE with ZERO TEXT.

I then reviewed my firewall to ensure it was not blocking by it, and nope, not blocked or anything.
Tried reinstalling, same error. Tried making the dump file again, nothing.. still empty.


As per my main post, the only change was moving from BIOS 503 to 603.

[tamalero]

Forgot to mention, the other change was, obviously the new SPECTRE and release patches of Windows, that were installed between 2 days ago and Today.

[The Coolest]

Yes, I know that type of error, but I could use a TXT output from CPU-z to see if there's something Core Temp is missing.

[tamalero]

Yes, I know that type of error, but I could use a TXT output from CPU-z to see if there's something Core Temp is missing.

Ok I'm stupid, sorry. did not notice that you asked for the txt output of CPU-Z and not of cputemp..

Here you go!

Timers
-------------------------------------------------------------------------

ACPI timer 3.580 MHz
Perf timer 3.320 MHz
Sys timer 1.000 KHz


Processors Information
-------------------------------------------------------------------------

Socket 1 ID = 0
Number of cores 16 (max 16)
Number of threads 32 (max 32)
Name AMD Ryzen Threadripper 1950X
Codename Threadripper
Specification AMD Ryzen Threadripper 1950X 16-Core Processor
Package Socket SP3r2 (4094)
CPUID F.1.1
Extended CPUID 17.1
Core Stepping ZP-B1
Technology 14 nm
TDP Limit 180.0 Watts
Tjmax 68.0 °C
Core Speed 3947.7 MHz
Multiplier x Bus Speed 39.5 x 99.9 MHz
Base frequency (cores) 99.9 MHz
Base frequency (ext.) 99.9 MHz
Instructions sets MMX (+), SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, SSE4A, x86-64, AMD-V, AES, AVX, AVX2, FMA3, SHA
Microcode Revision 0x8001136
L1 Data cache 16 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 16 x 64 KBytes, 4-way set associative, 64-byte line size
L2 cache 16 x 512 KBytes, 8-way set associative, 64-byte line size
L3 cache 4 x 8 MBytes, 16-way set associative, 64-byte line size
Max CPUID level 0000000Dh
Max CPUID ext. level 8000001Fh
Cache descriptor Level 1, D, 32 KB, 2 thread(s)
Cache descriptor Level 1, I, 64 KB, 2 thread(s)
Cache descriptor Level 2, U, 512 KB, 2 thread(s)
Cache descriptor Level 3, U, 8 MB, 8 thread(s)
FID/VID Control yes
# of P-States 3
P-State FID 0x89E - VID 0x30 (39.50x - 1.250 V)
P-State FID 0xA96 - VID 0x59 (30.00x - 0.994 V)
P-State FID 0xC84 - VID 0x6A (22.00x - 0.887 V)


Note that I cannot upload the attachment.. it says the file is too big (256Kb)

So here is the url for the pastebin: https://pastebin.com/w7RYARTJ

[Naki]

If you ZIP the text file, it should easily fit inside the 256 KB limit.